Cocktail ring from gold plated brass of the “Phaos” collection.
Phaos <φάος/φως> is the ancient Greek word for light.
The “Phaos” jewellery collection draws inspiration from the nature of light as the core of everyday life, which laid the foundations for Modern Physics and Information Age.
This entire collection is, after all, created from powder using light amplification by stimulated emission of radiation; it is 3D printed using a laser!
In addition, via the story of light, project “Phaos” pays tribute to all the pioneers, those radically successful people who have a ferocious drive that makes them never give up.
The ring is fabricated using lost wax casting.
First, it’s printed in wax using a specialized high-resolution 3D printer. It is then put in a container where liquid plaster is poured in around it. Once the plaster sets, the wax is melted out in a furnace, and the remaining plaster becomes the mold. Molten brass is poured into this mold and set to harden. The plaster is broken away, and your ring is carefully cleaned and hand polished.
Finally, it goes through two plating steps; a layer of tin-rhodium is applied to provide strength and durability and then 14K gold plating provides the finishing touch.
3D Printed Brass, 14K Gold Plated
• CARE INSTRUCTIONS
• SIZE & FIT
Sits 1 cm Above Finger
|S||N||54||6 1/2||17 mm||53 mm|
|M||O||55 1/4||7||17.4 mm||55 mm|
|L||P||56 1/2||7 1/2||17.8 mm||56 mm|
|XL||Q||57 3/4||8||18 mm||57 mm|
We 'll be happy to create any size for you!
Just let us know if you need another size.